Easily Fix it

Amana Dishwasher Not Filling with Water? Try these FIXES

Last updated on by Muhammad Ali
Amana Dishwasher Not Filling with Water? Try these FIXES

Is your Amana dishwasher not filling with water? Luckily, there are several easy fixes that you can implement to rectify this problem.

Our Pick
True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack

Clears the grease and limescale clogging your filter, spray arms and drain line. Try this before pulling any parts out.

Pros:

  • Reaches what you cannot scrub by hand.
  • One tablet a month stops buildup.
  • Safe for every dishwasher brand.

Cons:

  • Heavy limescale may need two runs.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Amana Dishwasher Not Filling with Water

When your Amana dishwasher doesn’t fill with water, inspect the water supply line and clean it with vinegar and baking soda solution. Also, check the water inlet valve, and float switch.

Amana Dishwasher Water Inlet Valve

A new water inlet valve will most likely fix this issue on your Amana dishwasher.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Don’t worry. I will expand on the above solutions in more detail below. However, before you proceed, here is some word of caution:

If your dishwasher is under warranty, the easiest solution would be to contact Amana support and ask for advice. Unfortunately, opening your dishwasher will void its warranty in most cases, so leave it as a last option.

Check Water supply

With the passage of time, calcium and other salts build up in the water supply pipe, which end up clogging the supply.

Remove it from your dishwasher and circulate pressurized water through it to remove any debris from it.

I’d also recommend pouring baking soda and vinegar solution through it and passing hot water.

Water Inlet Valve

Your Amana dishwasher won’t fill with water if its water inlet valve is jammed due to dust and debris. Make sure that the water inlet valve is clean.

If it is clean and your dishwasher is still not getting water, you may need to replace the valve. Again, I’d advise seeking expert services to replace your Amana dishwasher inlet valve.

Check Float Switch

The purpose of the float switch is to automatically shut off the water inlet valve when it is overfilling.

However, if the float switch is defective, it will prevent your Amana dishwasher from getting water.

Here’s how to locate and test your dishwasher float switch:

Conclusion

When your Amana dishwasher is not filling with water, try the following troubleshooting methods to fix it:

  • Check and clean the water supply line
  • Inspect and clean the water inlet valve
  • Check and test the float switch

If you still have issues with your Amana dishwasher, contact Amana customer support or call them at +1-866-616-2664. They are available Monday to Friday, from 8 am to pm (ET).

Amana Dishwasher Water Inlet Valve

A new water inlet valve will most likely fix this issue on your Amana dishwasher.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Our Pick
SplaShh Dishwasher Cleaner and Deodorizer Tablets

Kills the stale smell when dishes come out clean but the machine does not. Clears residue from the sump and filter.

Pros:

  • Targets odor at the source.
  • Cuts limescale in hard water.
  • Runs on an empty cycle.

Cons:

  • Rinse the filter first for best results.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Amana Dishwasher Still Not Working?

Start with the problem you are seeing. Use our dishwasher diagnostic tool, answer a few easy questions, and get the solution.

Use Our Amana Dishwasher Troubleshooting Tool

Was this page helpful?

Written by

Muhammad Ali

Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.