Easily Fix it

How to Fix Error Code SE on Samsung Washing Machine

Last updated on by Muhammad Ali
How to Fix Error Code SE on Samsung Washing Machine

5E or SE error code on Samsung washers/washing machines is related to drainage system of the washer.

This guide explains how to easily fix it.

Please note that error code SE and error code 5E are same. It's just that they look identical when appears on the Samsung washer display.

Our Pick
ROVSUN 17.8LBS Portable Washing Machine

A full size portable washer that gets your laundry moving again while the main machine is out of action. Plugs into any tap, no plumbing needed.

Pros:

  • Handles a real 17.8 lb load, not just socks.
  • Hooks to a kitchen tap in minutes.
  • Keeps laundry going during a repair.

Cons:

  • Needs floor space near a sink.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

What Causes Error Code SE or 5E on Samsung Washers?

The error code SE/5E is could be due to one of these reasons:

Samsung Washer Control Board

A new control board will most likely fix this issue on your Samsung washer.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

  • Clogging of drain filter
  • Drain pump malfunctioning
  • Blockage in the drain filter

How to Fix Error Code SE or 5E on Samsung washing machines

Here's how to fix error code SE or 5E on Samsung washing machines:

  • Inspect and tighten the drain hose
  • Reset your washing machine
  • Check and inspect the drain pump

Inspect and Tighten Drain Hose

The drain hose is where the used water is pumped out of the Samsung washer. If your washing machine cannot drain the water, the door won’t open.

So, when your Samsung washer displays error code SE, then it's most probably due to the drain hose, which is either damaged or loose.

To check the drain hose, first, disconnect your Samsung washing machine from the power source. Then, access the drain hose and make sure it is properly tightened in its place. Also, check it for any clogs or obstructions.

Follow the DIY instructions in the below video on how to access the drain hose:

Reset your Washing Machine

Resetting your Samsung washer will restore factory settings, which can fix many annoying and random errors, such as a error code SE.

Here’s a detailed guide on how to reset Samsung washing machine.

Inspect the Drain Pump

If none of the above works, your washing machine drain pump may have malfunctioned. As its name suggests, the drain pump is the central part responsible for draining the water from the washer.

If your Samsung front loader washing machine is under warranty, then you can get the drain pump replaced for free. However, if its warranty period is over, you will have to contact a repair technician to inspect and fix it for you.

If you still have issues with your Samsung washing machine, contact Samsung support or call them at +1-800-726-7864. You could also reach out to them on Twitter.

Samsung Washer Control Board

A new control board will most likely fix this issue on your Samsung washer.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Our Pick
Zyro Washing Machine Cleaner Tablet

Clears the detergent sludge and limescale that clogs drain pumps and makes a washer smell. Run one before you start pulling the machine apart.

Pros:

  • Targets the buildup behind drain faults.
  • One tablet a month keeps it clear.
  • Works in front and top loaders.

Cons:

  • Heavy buildup may need two runs.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Samsung Washing Machine Still Not Working?

Start with what your washing machine is doing. Use our diagnostic tool, answer a few easy questions, and get the solution.

Use Our Samsung Washing Machine Troubleshooting Tool

Was this page helpful?

Written by

Muhammad Ali

Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.