Frigidaire Dishwasher Error Code I30 - Causes and Easy Solutions
Frigidaire Dishwasher displays different error codes on the display to warn the user in case of malfunctioning.
The error code I30 is one of those codes, which is displayed when your dishwashers consume excessive water.
If you also see water on the floor, read our guide about a Frigidaire dishwasher leaking from the bottom.
Clears the grease and limescale clogging your filter, spray arms and drain line. Try this before pulling any parts out.
Pros:
- Reaches what you cannot scrub by hand.
- One tablet a month stops buildup.
- Safe for every dishwasher brand.
Cons:
- Heavy limescale may need two runs.
As an Amazon Associate I earn from qualifying purchases.
| True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack | Check Price |
| SplaShh Dishwasher Cleaner and Deodorizer Tablets | Check Price |
| Finish Ultimate Quantum Dishwasher Pods | Check Price |
Frigidaire Dishwasher Error Code I30
If your Frigidaire dishwasher displays error code I30, simply reset your dishwasher. To do that, turn it Off and unplug it from the power. Turn it on again after 5-10 minutes. If this does not fix the problem, check your dishwasher door gasket, and clean its sprayer arms.
If your dishwasher is under warranty, the easiest solution would be to contact Frigidaire customer support for a replacement. Unfortunately, in most cases, opening your dishwasher will void its warranty.
Reset your Dishwasher
First of all, you turn off your dishwasher for 30 minutes and then plug it back in.
If the error is still displayed after restarting the machine, move to the next solution.
Check the Door Gasket
One of the significant causes of leakage from the bottom of your Frigidaire dishwasher door is a problem with the gasket.
Carefully inspect the gasket for cuts or gaps and analyze if it is closing the door properly.
If you see any voids when the door is closed, then most probably, the gasket is damaged, and you must replace it with a new one.
Use Recommended Detergent
Dishwashers have a specific type of soap or detergent. If you use ordinary dish soap or laundry detergent, the excessive suds may force the soap out of the dishwasher, causing leakage.
Always use a soap/detergent which is specifically made for dishwashers.
Conclusion
When your Frigidaire dishwasher displays error code I30, try the following troubleshooting methods to fix it:
- Reset the dishwasher
- Check the door gasket
- Use recommended detergent
If you still have issues with your Frigidaire dishwasher, contact Frigidaire support or call them at +1-800-374-4432. They are available Monday to Friday from 8:30am to 8pm (EST).
Kills the stale smell when dishes come out clean but the machine does not. Clears residue from the sump and filter.
Pros:
- Targets odor at the source.
- Cuts limescale in hard water.
- Runs on an empty cycle.
Cons:
- Rinse the filter first for best results.
As an Amazon Associate I earn from qualifying purchases.
| True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack | Check Price |
| SplaShh Dishwasher Cleaner and Deodorizer Tablets | Check Price |
| Finish Ultimate Quantum Dishwasher Pods | Check Price |
Frigidaire Dishwasher Still Not Working?
Start with the problem you are seeing. Use our dishwasher diagnostic tool, answer a few easy questions, and get the solution.
Use Our Frigidaire Dishwasher Troubleshooting ToolWas this page helpful?
Thanks for your feedback!
Written by
Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.