Easily Fix it

Kenmore Dishwasher not Spraying Water? Try these FIXES!

Last updated on by Muhammad Ali
Kenmore Dishwasher not Spraying Water? Try these FIXES!

One common issue reported by the Kenmore dishwasher owners that their dishwasher is not spraying water on the dishes.

Luckily, there is a simple fix that should resolve 90% or so of Kenmore dishwasher that stops spraying water.

Our Pick
True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack

Clears the grease and limescale clogging your filter, spray arms and drain line. Try this before pulling any parts out.

Pros:

  • Reaches what you cannot scrub by hand.
  • One tablet a month stops buildup.
  • Safe for every dishwasher brand.

Cons:

  • Heavy limescale may need two runs.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Kenmore dishwasher not spraying water

If your Kenmore dishwasher stops spraying water on the dishes, you need to reset it. First, unplug your dishwasher from the power outlet and wait for 5 minutes. While the dishwasher is unplugged, press and hold the start button for 1 minute to drain the residual power. After complete 5 minutes, plug your Kenmore dishwasher back in.

Kenmore Dishwasher Water Inlet Valve

A new water inlet valve will most likely fix this issue on your Kenmore dishwasher.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

If resetting your Kenmore dishwasher does not resolve the issue, try the additional fixes detailed below:

Remove some Dishes

If you put excessive dishes in your dishwasher, it won’t operate. The reason is that each dishwasher has a maximum capacity beyond which it cannot clean the dishes.

Secondly, adding too many dishes can block the water sprayer from reaching other dishes.

I never recommend fully loading your dishwasher and leaving a quarter of room for better cleaning and optimal performance.

Check Water Supply

If removing some dishes from your Kenmore dishwashers does not do the trick, then the next thing you should check is whether the water supply to the dishwasher is turned on or not.

Also, ensure that the inlet water pressure is within the dishwasher range. If it is too low, your Kenmore dishwasher won’t operate.

Clean the Dishwasher Spray Arm

As its name suggests, the spray arms on the Kenmore dishwasher are responsible for circulating and spraying the water on the dishes. They have small holes which does the spraying function.

Inspect the spray arm holes and see if they are clogged or not. You can clean them with a toothpick or small needle if they are clogged.

Conclusion

If your Kenmore dishwasher is not spraying water, don’t panic, and try the following troubleshooting methods to fix it:

  • Remove some dishes
  • Check water supply
  • Clean the spray arm

If you still have issues with your Kenmore dishwasher, contact Kenmore customer support or call them at +1-844-553-667. You can also email them on customersupport@kenmore.com.

Kenmore Dishwasher Water Inlet Valve

A new water inlet valve will most likely fix this issue on your Kenmore dishwasher.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Our Pick
SplaShh Dishwasher Cleaner and Deodorizer Tablets

Kills the stale smell when dishes come out clean but the machine does not. Clears residue from the sump and filter.

Pros:

  • Targets odor at the source.
  • Cuts limescale in hard water.
  • Runs on an empty cycle.

Cons:

  • Rinse the filter first for best results.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Kenmore Dishwasher Still Not Working?

Start with the problem you are seeing. Use our dishwasher diagnostic tool, answer a few easy questions, and get the solution.

Use Our Kenmore Dishwasher Troubleshooting Tool

Was this page helpful?

Written by

Muhammad Ali

Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.