KitchenAid Dishwasher Not Filling with Water? Here’re Easy Fixes
Is your KitchenAid dishwasher not filling with water? Luckily, there are several easy fixes that you can implement to rectify this problem.
Clears the grease and limescale clogging your filter, spray arms and drain line. Try this before pulling any parts out.
Pros:
- Reaches what you cannot scrub by hand.
- One tablet a month stops buildup.
- Safe for every dishwasher brand.
Cons:
- Heavy limescale may need two runs.
As an Amazon Associate I earn from qualifying purchases.
| True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack | Check Price |
| SplaShh Dishwasher Cleaner and Deodorizer Tablets | Check Price |
| Finish Ultimate Quantum Dishwasher Pods | Check Price |
KitchenAid Dishwasher Not Filling with Water
When your KitchenAid dishwasher doesn’t fill with water, inspect the water supply line and clean it with vinegar and baking soda solution. Also, dont forget to check the water inlet valve, and float switch.
Don’t worry. I will expand on the above solutions in more detail below. However, before you proceed, here is some word of caution:
If your dishwasher is under warranty, the easiest solution would be to contact KitchenAid support and ask for advice. Unfortunately, opening your dishwasher will void its warranty in most cases, so leave it as a last option.
Check Water Supply
With the passage of time, calcium and other salts build up in the water supply pipe, which end up clogging the supply.
Remove it from your dishwasher and circulate pressurized water through it to remove any debris from it.
I’d also recommend pouring baking soda and vinegar solution through it and passing hot water.
Water Inlet Valve
Your KitchenAid dishwasher won’t fill with water if its water inlet valve is jammed due to dust and debris. Make sure that the water inlet valve is clean.
If it is clean and your dishwasher is still not getting water, you may need to replace the valve. Again, I’d advise seeking expert services to replace your KitchenAid dishwasher inlet valve.
Check Float Switch
The purpose of the float switch is to automatically shut off the water inlet valve when it is overfilling.
However, if the float switch is defective, it will prevent your KitchenAid dishwasher from getting water.
Here’s how to locate and test your dishwasher float switch:
Conclusion
When your KitchenAid dishwasher is not filling with water, try the following troubleshooting methods to fix it:
- Check and clean the water supply line
- Inspect and clean the water inlet valve
- Check and test the float switch
If you still have issues with your KitchenAid dishwasher, contact KitchenAid support or call them at +1-800-422-1230. They are available Monday to Friday from 8 am to 6 pm (EST).
Kills the stale smell when dishes come out clean but the machine does not. Clears residue from the sump and filter.
Pros:
- Targets odor at the source.
- Cuts limescale in hard water.
- Runs on an empty cycle.
Cons:
- Rinse the filter first for best results.
As an Amazon Associate I earn from qualifying purchases.
| True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack | Check Price |
| SplaShh Dishwasher Cleaner and Deodorizer Tablets | Check Price |
| Finish Ultimate Quantum Dishwasher Pods | Check Price |
KitchenAid Dishwasher Still Not Working?
Start with the problem you are seeing. Use our dishwasher diagnostic tool, answer a few easy questions, and get the solution.
Use Our KitchenAid Dishwasher Troubleshooting ToolWas this page helpful?
Thanks for your feedback!
Written by
Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.