Amana Washer Making a Loud Noise During Spin? Here's How to Fix It

So, is your Amana washer making a loud noise during spin?

I think the best place to begin is with the simple checks. I would stop the cycle and check the load, drum, and washer feet, since an uneven load or a loose object can cause a noise that starts suddenly.

Checks for an Amana Washer Making Loud Noise

Start with the everyday causes. An Amana washer making loud noise during spin may have a trapped item, uneven load, loose feet, blocked pump, or worn moving part.

Besides this, notice whether the Amana washer is loud when spinning only. A loud banging noise points toward movement, while a grinding noise during spin or rumbling noise when spinning may need service.

Check for One Heavy Item

So, a towel, blanket, or tangled sheet can gather on one side of the Amana drum and cause a loud banging noise. Spread heavy pieces around and remove a few items if the tub is packed.

However, try a short spin after rearranging the clothes. Stop again if the cabinet begins hitting the wall or the banging returns.

This part around the wash load often get forgotten on an Amana washer while you look over the machine.

Have a Loose Drum Inspected

Remember, a rumbling noise when spinning, a loose drum, or metal scraping can point to a bearing, suspension, or drive problem in the Amana washer.

Besides this, these repairs involve heavy moving parts. Stop using the machine if it leaks, scrapes, or shakes violently, and ask a technician to inspect it.

A small moving part problem on the Amana often cause a much bigger symptom as you inspect it.

Steady the Washer on the Floor

However, press gently on opposite top corners of the Amana washer. If it rocks, adjust the feet until each one sits firmly on a hard floor, then tighten the locking nuts if fitted.

Further, if movement is stronger than the sound, follow the checks for an Amana washer that is shaking and moving.

The leveling foot on your Amana sometimes need only a simple correction during your first check.

Clean the Pump Filter if the Manual Shows One

Further, a grinding noise during spin may actually begin when the Amana washer pumps water out. If the manual shows a user accessible filter, clean it as directed and prepare for water to spill.

Before this check, unplug the machine before opening any filter. Do not keep running a noisy pump, because a trapped object can damage it.

This drain noise problem sometimes come and go on an Amana while you look for the cause.

Empty Pockets and Check the Seal

Also, pause the Amana washer, unplug it, and check the drum, pockets, and reachable seal folds for coins, clips, or other small objects.

So, turn the empty drum slowly by hand. Stop if it scrapes or jams, and do not reach below an agitator or open the cabinet.

Conclusion

These Amana checks move from simple causes of the problem to repairs that need professional help for a quieter spin.

• Check for One Heavy Item
• Have a Loose Drum Inspected
• Steady the Washer on the Floor
• Clean the Pump Filter if the Manual Shows One
• Empty Pockets and Check the Seal