LG Washer Making a Loud Noise During Spin? Try these FIXES!

Is your LG washer still making a loud noise during spin?

I think the simple checks are the right place to start. I would stop the cycle and check the load, drum, and washer feet, because an uneven load or a loose object can cause a noise that starts suddenly.

What Causes LG Washer Spin Noise?

Start with the easiest checks. An LG washer making loud noise during spin may have a trapped item, uneven load, loose feet, blocked pump, or worn moving part.

In many cases, notice whether the LG washer is loud when spinning only. A loud banging noise points toward movement, while a grinding noise during spin or rumbling noise when spinning may need service.

Stop Using a Washer With a Deep Rumble

Before moving on, a rumbling noise when spinning, a loose drum, or metal scraping can point to a bearing, suspension, or drive problem in the LG washer.

In many cases, these repairs involve heavy moving parts. Stop using the machine if it leaks, scrapes, or shakes violently, and ask a technician to inspect it.

One of these moving part check can reveal what changed as you inspect it.

Inspect the Drum for Trapped Objects

Besides this, pause the LG washer, unplug it, and check the drum, pockets, and reachable seal folds for coins, clips, or other small objects.

Next, turn the empty drum slowly by hand. Stop if it scrapes or jams, and do not reach below an agitator or open the cabinet.

The loose item on your LG often show a useful clue during your first check.

Check Whether the Cabinet Rocks

For this check, press gently on opposite top corners of the LG washer. If it rocks, adjust the feet until each one sits firmly on a hard floor, then tighten the locking nuts if fitted.

As you work, if movement is stronger than the sound, follow the checks for an LG washer that is shaking and moving.

A few minute spent on the LG leveling foot can be useful while you look for the cause.

Untangle and Reduce the Load

Next, a towel, blanket, or tangled sheet can gather on one side of the LG drum and cause a loud banging noise. Spread heavy pieces around and remove a few items if the tub is packed.

For this check, try a short spin after rearranging the clothes. Stop again if the cabinet begins hitting the wall or the banging returns.

On an LG washer, this wash load are easy to overlook before you decide on service.

Inspect a Noise During Draining

As you work, a grinding noise during spin may actually begin when the LG washer pumps water out. If the manual shows a user accessible filter, clean it as directed and prepare for water to spill.

Before you begin, unplug the machine before opening any filter. Do not keep running a noisy pump, because a trapped object can damage it.

Conclusion

Try the safe LG checks first for a quieter spin, then leave internal repairs to a technician.

• Stop Using a Washer With a Deep Rumble
• Inspect the Drum for Trapped Objects
• Check Whether the Cabinet Rocks
• Untangle and Reduce the Load
• Inspect a Noise During Draining