Easily Fix it

Siemens Dishwasher Error Code E15 - Easy Solution to Fix

Last updated on by Muhammad Ali
Siemens Dishwasher Error Code E15 - Easy Solution to Fix

The error code E15 on Siemens Dishwasher indicates the activation of Aquastop system in the machine. The Aquastop system is activated in the case of overflow of water into the machine.

Other factors like malfunctioning water level sensor, or issues with the hosepipe or the drain filter can also lead to this problem on Siemens dishwashers.

Similarly, usage of excessive detergent is also reported to be one of leading cause of error code e15 on Siemens dishwashers.

Our Pick
True Fresh Dishwasher Cleaner & Deodorizer Tablets, 24-Pack

Clears the grease and limescale clogging your filter, spray arms and drain line. Try this before pulling any parts out.

Pros:

  • Reaches what you cannot scrub by hand.
  • One tablet a month stops buildup.
  • Safe for every dishwasher brand.

Cons:

  • Heavy limescale may need two runs.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Siemens Dishwasher Error code E15

The first thing that you need to do to fix error code E15 is to reset your Siemens dishwasher, as the error might have been caused due to a glitch in the dishwasher system.

Siemens Dishwasher Control Board

A new control board will most likely fix this issue on your Siemens dishwasher.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

If your dishwasher is under warranty, the easiest solution would be to contact Siemens support and ask for advice. Unfortunately, opening your dishwasher will void its warranty in most cases, so leave it as a last option.

If this doesn't work, then follow the below steps to troubleshoot it:

  1. Turn off the machine and disconnect it from the mains.
  2. Pull the machine out, to let the water run out easily.
  3. Check the tray under the dishwasher. Make sure it is dry.
  4. Dissemble the lid and the back panel of the machine. This will lead you to the tray and the detergent section.
  5. Now run a test cycle, but be very careful as the machine is not properly assembled.
  6. Now analyze where the leakage is taking place and repair/replace the malfunctioning part.
  7. Also, check the water level sensor (with a multimeter) and its contacts. If it is burnt-out, replace it.

If you still have issues with your Siemens dishwasher, contact Siemens customer support.

Siemens Dishwasher Control Board

A new control board will most likely fix this issue on your Siemens dishwasher.

Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Our Pick
SplaShh Dishwasher Cleaner and Deodorizer Tablets

Kills the stale smell when dishes come out clean but the machine does not. Clears residue from the sump and filter.

Pros:

  • Targets odor at the source.
  • Cuts limescale in hard water.
  • Runs on an empty cycle.

Cons:

  • Rinse the filter first for best results.
Check Price on Amazon

As an Amazon Associate I earn from qualifying purchases.

Siemens Dishwasher Still Not Working?

Start with the problem you are seeing. Use our dishwasher diagnostic tool, answer a few easy questions, and get the solution.

Use Our Siemens Dishwasher Troubleshooting Tool

Was this page helpful?

Written by

Muhammad Ali

Muhammad Ali is an Electrical Engineer and Appliance Repair Specialist from Canada, who has been helping people fix their appliances since 2020.