Easy Ways to Stop a Speed Queen Washer from Shaking and Moving

Is your Speed Queen washer shaking or moving during spin?

I would not assume a major part has failed yet. I suggest you stop the spin and check the laundry, floor, and leveling feet, because a lopsided load or an unsteady foot can make the whole washer move.

How to Stop a Speed Queen Washer From Shaking

First, check the simple causes. To stop a Speed Queen washer shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

Remember, if the Speed Queen washer is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Check the Floor First

At this point, the Speed Queen washer needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

Also, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washer against a wall.

The simple signs around this floor is easy to miss before you try a harder repair.

Check a Recent Installation

However, if the Speed Queen washer has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

Further, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

The Speed Queen may gives you a useful clue around this installation while you look over the machine.

Level All Four Feet

With safety in mind, unplug the Speed Queen washer and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

So, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

There is usually a few clues around the Speed Queen washer foot as you inspect it.

Have the Suspension Inspected

Further, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the Speed Queen tub bounce or walk across the floor.

Remember, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the Speed Queen washer is loud during spin.

These suspension is also worth your attention during your first check.

Spread Out Heavy Clothes

So, separate tangled clothes and spread heavy items around the Speed Queen drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

However, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

Conclusion

The simple checks above should help you get a steadier machine or decide whether the Speed Queen needs service.

• Check the Floor First
• Check a Recent Installation
• Level All Four Feet
• Have the Suspension Inspected
• Spread Out Heavy Clothes