Fisher & Paykel Washer Smells Bad? Here's How to Clean It

Have you noticed that your Fisher and Paykel washer is smelling bad?

I think the best place to begin is with the simple checks. I would look for damp residue around the tub, seal, drawer, and drain, since trapped moisture and too much detergent can make the smell return.

How to Remove Mold Smells From a Fisher and Paykel Washer

This is what I would check. To clean a smelly Fisher and Paykel washer, air the tub, wipe damp areas, run the cleaning cycle, clear old water, and reduce detergent buildup.

At this point, these checks show how to get rid of mold when the Fisher and Paykel washer smells like mildew, and where to look if it smells like rotten eggs.

Stop Moisture From Sitting Inside

Next, take wet laundry out of the Fisher and Paykel washer soon after the cycle. Wipe visible moisture and leave the door or lid open when the machine is unused, as long as children and pets cannot get inside.

For this check, a closed damp tub lets a mildew smell return quickly. Giving it time to dry can clear a light odor and slows new growth.

There is usually a few clues around the Fisher and Paykel damp tub during your first check.

Follow the Model Cleaning Instructions

As you work, run the Fisher and Paykel cleaning cycle with an empty tub and only the cleaner or bleach amount allowed in the manual. If there is no named cleaning cycle, follow the model's regular cleaning directions.

Before going further, never mix bleach with vinegar, ammonia, or another cleaner. Extra product does not clean better and may leave more residue.

These cleaning cycle is also worth your attention while you look for the cause.

Check Why Dirty Water Remains

Before moving on, standing water can make the Fisher and Paykel washer smell like rotten eggs. If the manual shows a user accessible pump filter, unplug the machine, prepare for water, and clean it as directed.

At this point, straighten the drain hose and check for a reachable blockage. If the smell is strongest at the wall drain or other fixtures, ask a plumber to inspect the household drain.

The simple signs around this drain path is easy to miss before you decide on service.

Wipe Away Soap Film

For this check, use a soft cloth and a cleaner approved for the Fisher and Paykel washer. Wipe reachable seal folds on a front loader, or the tub rim, lid, and reachable wash plate area on a top loader.

As you work, wear gloves and never scrape a seal with a sharp tool. A cracked or deeply molded seal should be replaced by a technician.

The Fisher and Paykel may gives you a useful clue around this seal area as you compare each result.

Stop Detergent Residue Returning

In many cases, use the detergent type and amount listed for the Fisher and Paykel washer. Too much soap leaves a film that traps lint, moisture, and odor.

At this point, if the drawer is stuck, wet, or leaving soap behind, follow the full steps for a Fisher and Paykel washer that is not dispensing detergent. That guide explains how to clean a smelly washer drawer without forcing it.

Conclusion

The simple checks above should help you get a fresher tub or decide whether the Fisher and Paykel needs service.

• Stop Moisture From Sitting Inside
• Follow the Model Cleaning Instructions
• Check Why Dirty Water Remains
• Wipe Away Soap Film
• Stop Detergent Residue Returning