Bosch Washing Machine Loud When Spinning? Try these FIXES!

So, is your Bosch washing machine making a loud noise during spin?

I would suggest starting with the checks you can do safely. I think you should stop the cycle and check the load, drum, and washer feet, because an uneven load or a loose object can cause a noise that starts suddenly.

Bosch Washing Machine Spin Noise and What to Check

Before replacing a part, check the simple causes. A Bosch washing machine making loud noise during spin may have a trapped item, uneven load, loose feet, blocked pump, or worn moving part.

Also, notice whether the Bosch washing machine is loud when spinning only. A loud banging noise points toward movement, while a grinding noise during spin or rumbling noise when spinning may need service.

Rearrange the Laundry

As you work, a towel, blanket, or tangled sheet can gather on one side of the Bosch drum and cause a loud banging noise. Spread heavy pieces around and remove a few items if the tub is packed.

Before moving on, try a short spin after rearranging the clothes. Stop again if the cabinet begins hitting the wall or the banging returns.

These wash load is also worth your attention before you try a harder repair.

Find Out if the Pump Is Grinding

In many cases, a grinding noise during spin may actually begin when the Bosch washing machine pumps water out. If the manual shows a user accessible filter, clean it as directed and prepare for water to spill.

First, unplug the machine before opening any filter. Do not keep running a noisy pump, because a trapped object can damage it.

The simple signs around this drain noise is easy to miss while you look over the machine.

Look for an Item Rubbing the Drum

For this check, pause the Bosch washing machine, unplug it, and check the drum, pockets, and reachable seal folds for coins, clips, or other small objects.

As you work, turn the empty drum slowly by hand. Stop if it scrapes or jams, and do not reach below an agitator or open the cabinet.

The Bosch may gives you a useful clue around this loose item as you inspect it.

Check Worn Parts With Professional Help

At this point, a rumbling noise when spinning, a loose drum, or metal scraping can point to a bearing, suspension, or drive problem in the Bosch washing machine.

Also, these repairs involve heavy moving parts. Stop using the machine if it leaks, scrapes, or shakes violently, and ask a technician to inspect it.

There is usually a few clues around the Bosch moving part during your first check.

Adjust Loose Leveling Feet

Before moving on, press gently on opposite top corners of the Bosch washing machine. If it rocks, adjust the feet until each one sits firmly on a hard floor, then tighten the locking nuts if fitted.

In many cases, if movement is stronger than the sound, follow the checks for a Bosch washing machine that is shaking and moving.

Conclusion

Use what the Bosch washing machine is doing to choose the most useful check and get a quieter spin.

• Rearrange the Laundry
• Find Out if the Pump Is Grinding
• Look for an Item Rubbing the Drum
• Check Worn Parts With Professional Help
• Adjust Loose Leveling Feet