Easy Ways to Stop a Bosch Washing Machine from Shaking

Does your Bosch washing machine keep shaking or moving during spin?

I think the best place to begin is with the simple checks. I would stop the spin and check the laundry, floor, and leveling feet, since a lopsided load or an unsteady foot can make the whole washer move.

Bosch Washing Machine Movement and Leveling Checks

Before replacing a part, check the simple causes. To stop a Bosch washing machine shaking or moving, steady the floor, level the feet, balance the load, check installation, and inspect the suspension.

However, if the Bosch washing machine is vibrating badly during spin, watch whether it is walking across the floor or shaking violently before you decide how to stop it moving.

Make Sure Shipping Hardware Is Gone

Also, if the Bosch washing machine has been vibrating badly during spin since it was installed or moved, compare the setup with its installation guide.

So, remove only the shipping bolts or braces named for your exact model. Do not guess, because the parts and locations differ between machines.

The installation on your Bosch often show a useful clue as you inspect it.

Start With a Solid Floor

Before moving on, the Bosch washing machine needs a hard, steady surface. A soft mat, loose board, or flexible floor can turn normal spin movement into heavy shaking.

In many cases, stand beside the machine and notice whether the floor moves under your weight. Have a weak floor checked instead of trying to brace the washing machine against a wall.

A few minute spent on the Bosch floor can be useful during your first check.

Have Worn Suspension Parts Tested

So, if you are wondering how to stop it moving after the simple checks, worn springs, rods, or shock absorbers may let the Bosch tub bounce or walk across the floor.

However, a washer that is shaking violently can pull on its hoses. Stop using it and have the suspension inspected; for sound without much movement, see why the Bosch washing machine is loud during spin.

On a Bosch washing machine, this suspension are easy to overlook while you look for the cause.

Rearrange a Lopsided Load

At this point, separate tangled clothes and spread heavy items around the Bosch drum. Remove pieces if it is packed, and avoid spinning one absorbent rug or blanket by itself.

Also, run an empty spin after removing the load. A steady empty machine points back to the way the laundry was arranged.

One of these laundry load check can reveal what changed before you decide on service.

Check the Level From Side to Side

First, unplug the Bosch washing machine and press on each top corner. Adjust the feet until the cabinet does not rock and all four points stay on the floor.

At this point, use the model instructions for locking the feet after adjustment. Leave enough space behind the machine so hoses are not stretched.

Conclusion

Start with the easiest Bosch checks for a steadier machine, and stop if the machine becomes unsafe.

• Make Sure Shipping Hardware Is Gone
• Start With a Solid Floor
• Have Worn Suspension Parts Tested
• Rearrange a Lopsided Load
• Check the Level From Side to Side